Clutch Cannon

Automan Cannon — 1.85″ stroke – 5″ body, 2.05″ stroke – 5.5″ body, 2.55″ stroke —
(Plastic stroke limiters can be added
A) release/throwout bearing. (different sizes -O.D. for different styles of arms)
B) Bearing collar/hub, and push tube
C) Adjustable piston. ( to set initial position of cannon moment) adjuster “ADDS” to length of piston
D) Hydraulic cylinder (shown extended)
Hartman Cannon , Lenco 1 3/4 reverser
(rear of cannon has bolt pattern of reverser that was originally used on lenco 2-3 speed transmissions)
Input shaft to reverser (1-3/4 shown) is long enough to go threw the cannon
AFT Cannon 1.65″ stroke (2.5″ – main body)
Left – .5″ front plate for use on “stock” – small opening bellhousing, 2.5″ body rear plate for
reverser only small bolt pattern ( 4.275 overall length).
Right – same cannon with rear plate for lenco front case (transmission pattern), note an adapter to
use a lenco reverser (only) on a standard (no cannon) bellhousing could be used on this cannon
AFT front plate Left – standard bellhousing opening, Right — Keyhole large opening