| TFX 96, 2000,2002, and AJ (only in raised cam) | Crank Seals |
 |
2 bolt patterns are available for the front cover , original 5 – 1/4″ bolts (picture left) or RCD 5/16″ bolts (below)
Note: |
 |
Optional “wings” – extra wide to bolt to block with additional bolts on side of geardrive, also provisions for dual crank triggers and , optional integrated crankshaft bearing support built into cover.(shown left) |
| BAE,KB, AA-500,Indy and Mopar (426 and 440) | |
 |
Optional “wings” extra wide to with additional bolt on side of geardrive, also provisions for dual crank triggers (similar to above) There is 2 bolt patterns for front cover , original 5 1/4″ bolts (picture left) or RCD 5/16″ bolts Available with optional integrated crankshaft bearing support built into cover (RCD) . |
| Crankshaft gears: Available crank gear and drive hub options – 1 keyway, 2 keyway, RCD spline or PSI spline. also bottom hub available in center drive shown in top picture |
|
| Geardrives are similar for SBC, BBC, Donovan/392, 481x and TFX 92 ( not interchangeable with newer TFX’s) |
|
 |
|
 |
Belt Drives are available for stock mopar style blocks |
