Cam bearings

Hemi Racing Cam Bearings B/RB- Hemi engine stock Cam Bearings. Sold in complete sets of 5. Use for all engines, all years. –# SH876S Note aftermarket blocks have optional size and placement of camshaft bearings
Part #:	Size:	Diameter-OD	Diameter-ID	Material:	mopar #	60	Blocks
Clevite 77 SH876S	Std – STOCK		2.00	Babbit	P5249711		B/RB- stock hemi
	Std-Raised cam		2.00	babbit	P4876372
clevite 77 SH-2127S	54 mm	2.250	2.125	babbit			TFX 92/96/00
	54 mm	2.260	2.125	babbit			TFX 2002
	55 mm	2.313	2.16	babbit
	60 mm	2.483	2.36	babbit		# brg-60040 – jessel
	65 mm	2.678	2.55	babbit			481-x
	70 mm	2.880	2.75	babbit

	60 mm		2.36	Roller bearings	P5007361
	70 mm	2.880	2.75	Bronze
	70 mm	3.070	2.75	Roller bearings

(MAHLE) clevite SH-2127S Cam Bearing Set
TFX 96 – 2000, Cam bearings
2.124 cam shaft OD —- TFX 54 mm , 1.25”
Part Details for – Nitro Cam Bearing Set For AJPE Cylinder Blocks.

Component No	SH-710	SH-1111	SH-277
Positions	1-2-4	3	5
Min. Std. Shaft Diameter	2.1240IN 53.9496MM	2.1238IN 53.9445MM	1.7500IN 44.4500MM
Max. Std. Shaft Diameter	2.1250IN 53.9750MM	2.1248IN 53.9699MM	1.7507IN 44.4678MM
Min. Vert. Oil Clearance	0.0005IN 0.0127MM	0.0011IN 0.0279MM	0.0005IN 0.0127MM
Max. Vert. Oil Clearance	0.0045IN 0.1143MM	0.0043IN 0.1092MM	0.0040IN 0.1016MM
Max. Wall	0.0619IN 1.5723MM	0.0618IN 1.5697MM	0.0640IN 1.6256MM
Min. Brg. O.D. or Housing Bore	2.2495IN 57.1373MM	2.2495IN 57.1373MM	1.8792IN 47.7317MM
Max. Brg. O.D. or Housing Bore	2.2505IN 57.1627MM	2.2505IN 57.1627MM	1.8802IN 47.7571MM
Max. Length	0.6700IN 17.0180MM	0.5850IN 14.8590MM	0.7600IN 19.3040MM
Packaging Data
Pack Qty.	Length 3.625″, Width & Height 2.562″ Weight .422 lb

TFX (1,2,4 — not #3 ) SH-710 FORD-351C or M rear cam bearing (1 per set SH-710S)

TFX (1- 4 or just #3) SH-1111, Dura-Bond F-30 sh-111 is narrower and slightly more clearance than SH-710.
(SH-1111S 460 ci – all 5 cam bearings are same 2.250 od )

TFX ( 5 ) SH-277 1949-55 GM 331 , 1956-58 GM 365 or 390 ( 4 of 5 in the set)
rear cam bearing 1.885″ o.d. x .750″ wide x 1.755″ i.d.

TFX Cam Bearing Roll Pin 5MM x 45MM

for pos 1-4
F30 std
F30-1R +.010
F15-4 +.015
F15-3 +.030
F33-1 +.040
F33-1 +.040

for repairs use FE – 385 cam bearing
1 (2.310” OD)
2 (2.295” OD)
3 (2.280” OD)
4 (2.265” OD)