Cam bearings

Hemi Racing Cam Bearings
B/RB- Hemi engine stock Cam Bearings. Sold in complete sets of 5.
Use for all engines, all years. –# SH876S
Note aftermarket blocks have optional size and placement of camshaft bearings

Part #: Size: Diameter-OD Diameter-ID Material:

mopar #

60 Blocks
Clevite 77 SH876S Std – STOCK 2.00 Babbit

P5249711

B/RB- stock hemi
Std-Raised cam 2.00 babbit

P4876372

clevite 77
SH-2127S
54 mm 2.250 2.125 babbit TFX 92/96/00
54 mm 2.260 2.125 babbit TFX 2002
55 mm 2.313 2.16 babbit
60 mm 2.483 2.36 babbit # brg-60040 – jessel
65 mm 2.678 2.55 babbit 481-x
70 mm 2.880 2.75 babbit
60 mm 2.36 Roller bearings

P5007361

70 mm 2.880 2.75 Bronze
70 mm 3.070 2.75 Roller bearings

(MAHLE) clevite SH-2127S Cam Bearing Set
TFX 96 – 2000, Cam bearings

2.124 cam shaft OD —- TFX 54 mm , 1.25”
Part Details for – Nitro Cam Bearing Set For AJPE Cylinder Blocks.

Component No SH-710 SH-1111 SH-277
Positions 1-2-4 3 5
Min. Std. Shaft Diameter 2.1240IN
53.9496MM
2.1238IN
53.9445MM
1.7500IN
44.4500MM
Max. Std. Shaft Diameter 2.1250IN
53.9750MM
2.1248IN
53.9699MM
1.7507IN
44.4678MM
Min. Vert. Oil Clearance 0.0005IN
0.0127MM
0.0011IN
0.0279MM
0.0005IN
0.0127MM
Max. Vert. Oil Clearance 0.0045IN
0.1143MM
0.0043IN
0.1092MM
0.0040IN
0.1016MM
Max. Wall 0.0619IN
1.5723MM
0.0618IN
1.5697MM
0.0640IN
1.6256MM
Min. Brg. O.D. or Housing Bore 2.2495IN
57.1373MM
2.2495IN
57.1373MM
1.8792IN
47.7317MM
Max. Brg. O.D. or Housing Bore 2.2505IN
57.1627MM
2.2505IN
57.1627MM
1.8802IN
47.7571MM
Max. Length 0.6700IN
17.0180MM
0.5850IN
14.8590MM
0.7600IN
19.3040MM
Packaging Data
Pack Qty. Length 3.625″, Width & Height 2.562″ Weight .422 lb

TFX (1,2,4 — not #3 ) SH-710 FORD-351C or M rear cam bearing (1 per set SH-710S)

TFX (1- 4 or just #3) SH-1111, Dura-Bond F-30 sh-111 is narrower and slightly more clearance than SH-710.
(SH-1111S 460 ci – all 5 cam bearings are same 2.250 od )

TFX ( 5 ) SH-277 1949-55 GM 331 , 1956-58 GM 365 or 390 ( 4 of 5 in the set)
rear cam bearing 1.885″ o.d. x .750″ wide x 1.755″ i.d.

TFX Cam Bearing Roll Pin 5MM x 45MM

for pos 1-4
F30 std
F30-1R +.010
F15-4 +.015
F15-3 +.030
F33-1 +.040
F33-1 +.040

for repairs use FE – 385 cam bearing
1 (2.310” OD)
2 (2.295” OD)
3 (2.280” OD)
4 (2.265” OD)