Dark Side Parts

OptionsPrice Can $
Billet fuel injector spacer (roots)Opening size top and bottom, divider, Injectors, lines,850.00
dist block (for above)65.00
NFC- Injector Angled Spacer 2″ height850.00
Blower – sideway mounted carb adapter1.5″ (optional height)400.00
Blower – inline carb adapter 2″ (optional height)400.00
PSI-CGC Injector adapter/Spacer Call
Idler Plates and PartsIdler plate Hemi-TFX with gear drive support
(optional – tabs for snout support)
185.00
Top Brace Washer .75 20.00
Top Brace .5″ slot60.00
Axle Idler Pulley 6.8″ .75″-16tpiBore (optional .625)60.00
Idler Pulley Standoff (custom)30.00ea
‘T” nut – For 1 Inch Slot Idler Plate20.00
Stud .5″x 2.25″ NF/NC5.00
Sliding Washer Top Idler Brace40.00
.75″ -16 12PT Nut30.00
5″ -20 Nut18.00
Angled Idler Plate Spacers65.00
Magneto Drive Spacer/Support110.00
Burst PanelsKit — specify size and applicationCall
JFR/Wilson (square) new25.00
JFR/Wilson (square) used18.00
AJPE small (rectangle) new35.00
AJPE small (rectangle) used20.00
Large (rectangle) new30.00
Large (rectangle) used15.00
Frame specify size and application
wiring & TethersTether Kit65.00
Chords 10′ 11′ or custom60.00
Anchors25.00
Custom Wrist Pin Buttonsspecify dimensions or send sample20.00 ea
Barrel Valve – click adjusterspecify injector style or length150.00
TF – Battery systemHolder billet aluminum140.00
Turnigy Graphene LiPo batteryCall
Lipo ChargerCall
Blower Studslength/diam and undercut – (set of 8) 80.00
PSI Screw Blower Alum. Relief Cut Blower Stud 7075 new20.00/ea
PSI Screw Blower Alum. Relief Cut Blower Stud 7075 used10.00/ea
Custom PSI Screw Blower Alum. Relief Cut Blower Stud 6061 – (set of 8) 80.00
Air switch/Tranducer LogSpecify # of switches20.00/switch
Prices are in Canadian Dollars $ (Shipping not included)