TA – A/F – TF – Battery system

Dark Side Battery Holder with some battery info:
The newer versions (new tech) have a much higher discharge rate
Must read— INFO https://www.genstattu.com/bw/
and —Wikipedia https://en.wikipedia.org/wiki/Lithium-ion_battery

Battery –-Turnigy Graphene Panther Battery Pack

Capacity: 3000mAh (3 Amp Hr )
Cell Count: 4
Voltage: 14.8V
Constant Discharge: 75 Amp Constant /150 Amp Burst (3s)
Battery Size: 137x45x34mm
Weight: 405g
Charge Plug: JST-XH
Discharge Plug: XT90

Battery – Turnigy Graphene LiPo battery packs (4 cell)

Specs:
Capacity: 3000mAh (3 Amp Hr )
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 45 Amp Constant / 90Amp Burst
Weight: 376g
Dimensions: 136x45x30mm
Charge Plug: JST-XH
Discharge Plug: XT-90

Note: Graphene LiPo Batteries only require a standard Lipo battery charger.

Battery – 5000mAh LiPo battery packs (4 cell)
1st generation ( lower current – peak )

Specs:
Capacity: 5000mAh (5 Amp Hr )
Configuration: 4S1P / 14.8v / 4Cell
Discharge: 25 Amp Constant / 35 Amp Burst
Pack Weight: 552g
Pack Size: 147 x 49 x 33mm
Charge Plug: JST-XH
Discharge plug: XT-90

4S -(4 cell – Lipo) is required for MSD, EM and Racepac

Do not short or puncture (very important)
also you must park it if not being used for long periods of time